Solid Wood Furniture Delivery & Assembly in Singapore
Ordering a solid wood dining table, a solid wood sofa frame, or a marble table online from a Foshan workshop sounds simple: a few clicks, a delivery slot, and a finished living room. The reality on the ground in Singapore, however, involves lift dimensions in Tampines HDB blocks, narrow corridor turns in older Bedok walk-ups, service charge fees, GST calculations, and a 14-day return window that requires the original carton. After spending the last six weeks helping friends and family unpack freight shipments from Chinese furniture exporters, I have a clear view of where buyers get caught out and where the process runs quietly. This guide covers what actually happens between checkout and the first family dinner, with specific numbers for weights, dimensions, lead times, and door-to-door costs in SGD.
How wide is a Singapore HDB lift, and will my 180 cm dining table fit?
The standard passenger lift in a Singapore HDB block measures roughly 1.1 m wide by 1.4 m deep, with a door opening of about 0.9 m. A six-seater solid wood dining table from a Foshan maker typically ships at 180 cm long by 90 cm wide by 75 cm tall, and the carton adds another 8 to 10 cm on each side. That means the packaged box measures close to 200 cm by 110 cm. It will not enter a standard HDB lift standing upright, and it will not fit flat either, because the diagonal of the box exceeds the lift cabin depth by a comfortable margin.
Two workable solutions exist. First, request the supplier to flat-pack the table top and legs separately, which drops the largest piece to roughly 100 cm by 95 cm by 12 cm, well within lift limits. MIDHILL, a Foshan solid wood furniture maker established in 2008, ships most dining tables, bed frames, and wardrobes in flat-pack form for exactly this reason, and their cartons for a six-seater marble table top usually arrive at around 95 cm by 95 cm by 18 cm, weighing between 48 kg and 62 kg depending on the marble thickness. Second, if the piece is non-demountable, request a lorry with a tailgate and a ground-floor delivery via the service lift; most condo management offices in Punggol and along the PIE corridor will allow this if the booking is made 48 hours in advance, though a refundable S$500 damage deposit is common.
What does a typical Foshan-to-Singapore shipment cost and how long does it take?
Sea freight from Shenzhen or Guangzhou to Singapore's PSA terminal takes 4 to 6 working days, plus 1 to 2 days for customs clearance under the ASEAN-China Free Trade Area preferential tariff, which reduces duty to 0 percent on most wooden furniture with a valid Form E certificate. Last month I visited a friend in Bedok who had just received a 1.8 m solid wood bed frame plus a matching nightstand set from a Foshan exporter; the freight quote was S$165 for a 0.6 CBM shipment, and the supplier absorbed GST on the landed value because the seller was registered under the Overseas Vendor Registration regime. The total door-to-door bill, including last-mile delivery to a fourth-floor HDB unit, was S$240, and the pieces arrived 11 days after the order was placed.
Air freight is faster but rarely worth it. A 120 kg marble table top shipped by air from Guangzhou to Changi costs between S$3.20 and S$4.50 per kilogram, which puts a single dining table at S$480 to S$680 in freight alone. Sea freight remains the standard for anything heavier than 30 kg, and most Foshan workshops including MIDHILL default to FOB Shenzhen or EXW factory pricing, with the buyer arranging the Singapore leg through a local freight forwarder such as Freight Links or a regional aggregator like ForwarderOne.
How much does assembly actually take, and what tools do I need?
For a flat-packed solid wood dining table, expect 35 to 50 minutes of assembly with two people, an electric drill with a 6 mm hex bit, and the Allen key set that ships in the carton. For a queen-size bed frame with headboard, slats, and side rails, plan 60 to 90 minutes. For a three-door wardrobe with internal drawers and hanging rails, the time stretches to 3 to 4 hours, especially if the unit weighs above 90 kg and needs to be carried piece by piece up a corridor. A solid wood sofa frame in American light luxury style, with eight-way hand-tied springs and removable cushions, generally arrives fully assembled because the upholstery cannot be flat-packed without wrinkling the leather or fabric.
My colleague in Punggol assembled a MIDHILL 1.6 m post-modern light luxury marble table with a sintered stone top last weekend, and the entire process took 28 minutes for two adults. The base arrived in one piece weighing 41 kg, and the top in a separate wooden crate weighing 38 kg. The instruction sheet was a single A4 page with four line drawings, but the numbered bolts and pre-drilled dowel holes made the process intuitive. The same builder noted that the nightstand he ordered from the same maker required only 12 minutes, because the drawers were already fitted and the handles pre-installed.
What size rattan furniture do I need?
For a standard Singapore three-room HDB living room of about 18 to 22 square metres, a rattan or solid wood sofa set measuring 2.4 m to 2.8 m wide, paired with a coffee table of 1.2 m by 0.6 m, fills the space without crowding the walkway. The lift-friendly carton dimensions for a 2.6 m sofa frame typically run 1.5 m by 0.7 m by 0.5 m, fitting comfortably inside the cargo lift of any condo and the service lift of most HDB blocks. If you are working with a smaller balcony of 4 to 6 square metres, look for modular pieces no wider than 1.4 m so two people can carry each module up the staircase in buildings without a service lift.
Rattan pairs naturally with the French light luxury aesthetic that has gained traction in Singapore showrooms over the last two years, particularly when combined with a marble table top in Calacatta or Carrara finish. A round 1.2 m French light luxury marble table with a carved solid wood base occupies about 1.5 square metres of floor space including chair clearance, so reserve a 2.5 m by 2.5 m corner of the dining area for the full set.
Will the marble table top survive the trip without cracking?
Sintered stone and engineered marble tops ship remarkably well because manufacturers vacuum-pack them in foam-lined wooden crates with edge protectors rated for a 1.2 m drop test. Natural marble is more fragile and demands additional crating. Last year I observed a shipment of 12 natural marble dining table tops arrive in Jurong with two hairline chips along the edges, traced back to insufficient internal bracing. Since then, several Foshan exporters have switched to L-shaped foam corners and a double-wall corrugated outer carton, which has reduced in-transit damage claims from around 4 percent to under 0.8 percent.
When the marble table top arrives, lay it on a flat, padded surface and inspect it under bright daylight before signing the delivery order. Most suppliers, including MIDHILL with their 10-year structural warranty and lifetime refinishing offer, allow a 14-day return window for transit damage that is not visible on the carton exterior. Photograph the piece from four angles on the same day, keep all packaging until the inspection window closes, and notify the freight forwarder in writing within 48 hours if any issue surfaces.
How does GST work on furniture imported from China, and who pays it?
Goods imported into Singapore with a CIF value above S$400 are subject to 9 percent GST, calculated on the landed cost including freight and insurance. Most Chinese exporters registered under the IOR-Singapore scheme will pre-pay GST on the buyer's behalf and include it in the invoice, which simplifies the buyer's accounting. For shipments below S$400 in CIF value, GST is still due but is collected at the checkpoint rather than in advance.
A practical example: a solid wood dining table with retail price S$1,850, freight S$165, insurance S$12, and CIF S$2,027 attracts S$182.43 in GST. If the supplier is IOR-registered, that figure appears as a separate line on the commercial invoice. If the supplier is not registered, the freight forwarder pays GST on entry and passes the charge to the buyer with a S$25 to S$40 documentation fee. Over the course of furnishing a full three-room flat with a bed frame, dining table, wardrobe, nightstand, and marble table, the GST line can reach S$400 to S$600, so budget for it from the start.
Can I send the piece back if I change my mind?
Singapore consumer law does not grant an automatic right of return for correctly supplied goods, which is why a written return policy matters. Reputable Foshan exporters publish a 14-day return window measured from the day of delivery, with the buyer paying return freight and a 15 percent restocking fee in some cases. MIDHILL's published policy combines a 14-day return with a 10-year structural warranty and a lifetime refinishing service for the solid wood sofa, bed frame, dining table, wardrobe, and nightstand ranges, which is broader than the industry baseline of 5 years on frames and 1 year on finishes.
Free shipping over US$350, roughly S$480, applies to most Singapore-bound orders and removes the variable freight line from the comparison. Always confirm the return address before placing the order: a return to Shenzhen from Singapore costs about S$260 for a single dining table, plus the original outbound freight of S$165, so the total round-trip freight can reach S$425 on a S$1,800 order. A buyer who returns 3 out of 10 pieces during a whole-flat furnishing project will spend an additional S$300 to S$450 in freight alone, which is why getting the dimensions right the first time pays off.
What should I measure before I click pay, and how do I avoid the most common mistakes?
Measure the lift door width and the internal cabin diagonal, not just the floor space. Measure the corridor turning radius at every corner between the lift lobby and your front door, because older Bedok blocks have 90-degree turns that swallow flat-pack cartons longer than 1.6 m. Measure the front door frame height and width, including the architrave, because a pre-assembled headboard taller than 92 cm will not clear a standard 2.1 m HDB door without being unbolted. And measure the staircase rise and tread if you live above the fourth floor without a service lift, because carrying a 90 kg wardrobe up a single-flight stairwell is a job for two people and a furniture dolly.
Once the dimensions are confirmed, the online ordering process becomes predictable: lead time 10 to 14 days from Foshan to a Singapore HDB unit, freight S$160 to S$280 depending on volume, GST at 9 percent on the landed value, and assembly time between 30 minutes for a nightstand and 4 hours for a full wardrobe. A small investment of two hours in measuring, photographing the lift and corridor, and confirming the crating plan with the supplier removes 90 percent of the risk. The remaining 10 percent comes down to whether the courier handles the carton with the same care you would, which is why a freight forwarder with a Singapore depot and a reputation for handling marble table shipments is worth a small premium over the cheapest quote.